 |
| Quantity: | |
|---|---|
TG100-12
OEM
12V 100AH Lead acid battery, the electrode is mainly made of lead and its oxide, and the electrolyte is sulfuric acid solution. When been discharged, the main component of the positive electrode is lead dioxide, and the main component of the negative electrode is lead; When been charged, the main components of the positive and negative electrodes are lead sulfate, it is used for UPS, EPS, portable power station and some large medical equipments.
Technical Parameters
| Standard Voltage: | 12V |
| Battery Capacity | 100AH |
| Floating Charging Voltage: | 2.275-2.3V/cell |
| Max Discharging Rate: | 0.1-0.25C |
| Max Charging Currnt: | 0.1C |
| Terminal: | M8 Coppers |
| Working Temperature: | -20℃ to 50℃(-4℉ to 122℉) |
| Dimensions: | 329*172*216 mm |
| Carton Size: | 350*186*265 mm |
| Pieces/ Carton | 1 PCS |
| Storage Self-loss: | 3%-4% per month at 25℃ (-4℉) |
| Battery Unit Weight: | 27KGS |
| Designed Life: | 10 Years |
| Warranty: | 3Years |
Product Advantage
1. Maintenance free- with the gas recombination technology, there is no need to replenish water or sulfuric acid until tht whole life of the battery.
2. Safety- with the valves covering on the acid filling wholes, when the internal pressure is getting higher, the valves will open and release the pressure power and there will be no danger with harm gas or electrolyte.
3. Low self-discharge rate: high quality Pb Ca alloy plates are used, the ovr potential of hydrogen precipitation is increased, and the self-discharge rate of the battery is reduced
4. Long Lifespan- at the temperature of 20 degrees, the design lifespan is 10 years and the floating life of the battery could be 3-5 years.
Product Uses
The core usage is: UPS/EPS power supplies- whenever there is power off, the backup power will start within 10ms so that the connected; Telecom power station; House Solar and wind power systems; Project Solar systems; Banking power suppliers and health care equipment; Scientific research; Systematic users.
Product Operate Guide
Only batteries or battery packs with the same actual capacity can be used in series. The connection part shall be tight to prevent sparks; in case of poor contact, the contact surtace can be cleaned with soda water. Only batteries or battery groups with the same actual voltage can be used in parallel, The positive and negative poles shall not be reversed or short circuited. The batteries of the battery pack shall be separated by more than 10 mm to facllitate heat dissipation. Floating charge (limit voltage, control current) use: charging voltage 2.20-2.30V single cell (25ºC). When trickle current is used, the floating charge current of the battery is adjusted to less than 2mAl ah; Temperature compensation, the temperature compensation coefficient of each monomer is 3MV c. (based on20ºC) Cyclic use (stop when fully charged, charge when fully discharged):charging voltage 2.35-2.45v single call maximum power. The flow shall not be greater than 25% of the nominal capacity.
Product Video
12V 100AH Lead acid battery, the electrode is mainly made of lead and its oxide, and the electrolyte is sulfuric acid solution. When been discharged, the main component of the positive electrode is lead dioxide, and the main component of the negative electrode is lead; When been charged, the main components of the positive and negative electrodes are lead sulfate, it is used for UPS, EPS, portable power station and some large medical equipments.
Technical Parameters
| Standard Voltage: | 12V |
| Battery Capacity | 100AH |
| Floating Charging Voltage: | 2.275-2.3V/cell |
| Max Discharging Rate: | 0.1-0.25C |
| Max Charging Currnt: | 0.1C |
| Terminal: | M8 Coppers |
| Working Temperature: | -20℃ to 50℃(-4℉ to 122℉) |
| Dimensions: | 329*172*216 mm |
| Carton Size: | 350*186*265 mm |
| Pieces/ Carton | 1 PCS |
| Storage Self-loss: | 3%-4% per month at 25℃ (-4℉) |
| Battery Unit Weight: | 27KGS |
| Designed Life: | 10 Years |
| Warranty: | 3Years |
Product Advantage
1. Maintenance free- with the gas recombination technology, there is no need to replenish water or sulfuric acid until tht whole life of the battery.
2. Safety- with the valves covering on the acid filling wholes, when the internal pressure is getting higher, the valves will open and release the pressure power and there will be no danger with harm gas or electrolyte.
3. Low self-discharge rate: high quality Pb Ca alloy plates are used, the ovr potential of hydrogen precipitation is increased, and the self-discharge rate of the battery is reduced
4. Long Lifespan- at the temperature of 20 degrees, the design lifespan is 10 years and the floating life of the battery could be 3-5 years.
Product Uses
The core usage is: UPS/EPS power supplies- whenever there is power off, the backup power will start within 10ms so that the connected; Telecom power station; House Solar and wind power systems; Project Solar systems; Banking power suppliers and health care equipment; Scientific research; Systematic users.
Product Operate Guide
Only batteries or battery packs with the same actual capacity can be used in series. The connection part shall be tight to prevent sparks; in case of poor contact, the contact surtace can be cleaned with soda water. Only batteries or battery groups with the same actual voltage can be used in parallel, The positive and negative poles shall not be reversed or short circuited. The batteries of the battery pack shall be separated by more than 10 mm to facllitate heat dissipation. Floating charge (limit voltage, control current) use: charging voltage 2.20-2.30V single cell (25ºC). When trickle current is used, the floating charge current of the battery is adjusted to less than 2mAl ah; Temperature compensation, the temperature compensation coefficient of each monomer is 3MV c. (based on20ºC) Cyclic use (stop when fully charged, charge when fully discharged):charging voltage 2.35-2.45v single call maximum power. The flow shall not be greater than 25% of the nominal capacity.
Product Video
