 |
| Quantity: | |
|---|---|
6-GFM-100
OEM
Gel Solar battery Serie-12V 100AH , charged with gel glue to activated the plates to store power energy, and there will be less floating acid liquid to make the battery less risk in leakage and corrosion, and less evaporation will make the battery longer life in lasting time.
Product Advantage
1.Deep cycle capability
Solar batteries need to have good deep cycle capability and be able to withstand repeated charging and discharging processes, especially the ability to overcharge and overdischarge.
2.Long life
Through special process design and colloidal electrolyte, solar batteries can achieve a long service life.
3.Environmental adaptability
Solar batteries need to be able to adapt to different environmental requirements, such as high altitude, high temperature, low temperature and other conditions to work normally.
4.Working principle
The DC voltage generated by the solar cell module converts the light energy into electrical energy, and the electric energy is transmitted to the battery for storage after the overcharge protection of the intelligent controller.
Technical Parameters
| Standard Voltage: | 12V |
| Battery Capacity | 100AH |
| Floating Charging Voltage: | 2.275-2.3V/cell |
| Discharging Rate: | 0.1-0.25C |
| Max Discharging Currnt Rate: | 0.1C |
| Terminal: | M8 Coppers |
| Working Temperature: | -20℃ to 50℃(-4℉ to 122℉) |
| Dimensions: | 329*172*216 mm |
| Carton Size: | 350*186*265 mm |
| Pieces/ Carton | 1 PCS |
| Storage Self-loss: | 3%-4% per month at 25℃ (-4℉) |
| Battery Unit Weight: | 24KGS |
| Designed Life: | 10 Years |
| Warranty: | 3Years |
Product Uses
The core usage is: UPS/EPS power supplies- whenever there is power off, the backup power will start within 10ms so that the connected; Telecom power station; House Solar and wind power systems; Project Solar systems; Banking power suppliers and health care equipment; Scientific research; Systematic users.
Product Operation Guide
Only batteries or battery packs with the same actual capacity can be used in series. The connection part shall be tight to prevent sparks; in case of poor contact, the contact surtace can be cleaned with soda water.
Only batteries or battery groups with the same actual voltage can be used in parallel. The positive and negative poles shall not be reversed or short circuited.
The batteries of the battery pack shall be separated by more than 10 mm to facllitate heat dissipation.
Regular inspection: Regularly check the battery, including voltage, connecting wires for looseness and corrosion pollution, and deal with it in time.
Charging precautions: When charging, make sure that the ambient temperature is suitable, use a suitable charger, and follow the correct charging method.
Prevent sun exposure: Prevent the battery from being exposed to the sun, and it should be cooled down before charging after exposure to avoid cracking or deformation of the battery.
Check the charger: Always observe the quality of the charger to ensure that the charger voltage protection device is working properly to prevent the battery from deforming caused by long-term charging.
Storage precautions: The battery should be fully charged before storage, and the storage environment should be clean, ventilated and dry, avoiding high temperature or direct sunlight.
Timely charging after discharge: The battery should be recharged immediately after discharging to avoid the battery capacity being unable to be restored due to long-term shelf.
Tighten the terminal block: Be sure to tighten the bolt of the terminal block when using it to avoid sparks and poor contact
Product Video
Gel Solar battery Serie-12V 100AH , charged with gel glue to activated the plates to store power energy, and there will be less floating acid liquid to make the battery less risk in leakage and corrosion, and less evaporation will make the battery longer life in lasting time.
Product Advantage
1.Deep cycle capability
Solar batteries need to have good deep cycle capability and be able to withstand repeated charging and discharging processes, especially the ability to overcharge and overdischarge.
2.Long life
Through special process design and colloidal electrolyte, solar batteries can achieve a long service life.
3.Environmental adaptability
Solar batteries need to be able to adapt to different environmental requirements, such as high altitude, high temperature, low temperature and other conditions to work normally.
4.Working principle
The DC voltage generated by the solar cell module converts the light energy into electrical energy, and the electric energy is transmitted to the battery for storage after the overcharge protection of the intelligent controller.
Technical Parameters
| Standard Voltage: | 12V |
| Battery Capacity | 100AH |
| Floating Charging Voltage: | 2.275-2.3V/cell |
| Discharging Rate: | 0.1-0.25C |
| Max Discharging Currnt Rate: | 0.1C |
| Terminal: | M8 Coppers |
| Working Temperature: | -20℃ to 50℃(-4℉ to 122℉) |
| Dimensions: | 329*172*216 mm |
| Carton Size: | 350*186*265 mm |
| Pieces/ Carton | 1 PCS |
| Storage Self-loss: | 3%-4% per month at 25℃ (-4℉) |
| Battery Unit Weight: | 24KGS |
| Designed Life: | 10 Years |
| Warranty: | 3Years |
Product Uses
The core usage is: UPS/EPS power supplies- whenever there is power off, the backup power will start within 10ms so that the connected; Telecom power station; House Solar and wind power systems; Project Solar systems; Banking power suppliers and health care equipment; Scientific research; Systematic users.
Product Operation Guide
Only batteries or battery packs with the same actual capacity can be used in series. The connection part shall be tight to prevent sparks; in case of poor contact, the contact surtace can be cleaned with soda water.
Only batteries or battery groups with the same actual voltage can be used in parallel. The positive and negative poles shall not be reversed or short circuited.
The batteries of the battery pack shall be separated by more than 10 mm to facllitate heat dissipation.
Regular inspection: Regularly check the battery, including voltage, connecting wires for looseness and corrosion pollution, and deal with it in time.
Charging precautions: When charging, make sure that the ambient temperature is suitable, use a suitable charger, and follow the correct charging method.
Prevent sun exposure: Prevent the battery from being exposed to the sun, and it should be cooled down before charging after exposure to avoid cracking or deformation of the battery.
Check the charger: Always observe the quality of the charger to ensure that the charger voltage protection device is working properly to prevent the battery from deforming caused by long-term charging.
Storage precautions: The battery should be fully charged before storage, and the storage environment should be clean, ventilated and dry, avoiding high temperature or direct sunlight.
Timely charging after discharge: The battery should be recharged immediately after discharging to avoid the battery capacity being unable to be restored due to long-term shelf.
Tighten the terminal block: Be sure to tighten the bolt of the terminal block when using it to avoid sparks and poor contact
Product Video
