 |
| Quantity: | |
|---|---|
TG65-12
OEM
12V 65AH Lead acid battery, the electrode is mainly made of lead and its oxide, and the electrolyte is sulfuric acid solution. When been discharged, the main component of the positive electrode is lead dioxide, and the main component of the negative electrode is lead; When been charged, the main components of the positive and negative electrodes are lead sulfate, it is used for UPS, EPS, portable power station and some large medical equipments.
Technical Parameters
| Standard Voltage: | 12V |
| Battery Capacity | 65AH |
| Floating Charging Voltage: | 2.275-2.3V/cell |
| Discharging Rate: | 0.1-0.25C |
| Max Discharging Currnt Rate: | 0.25C |
| Terminal: | M8 Coppers |
| Working Temperature: | -20℃ to 50℃(-4℉ to 122℉) |
| Dimensions: | 350*166*173 mm |
| Carton Size: | 365*179*210 mm |
| Pieces/ Carton | 1 PCS |
| Storage Self-loss: | 3%-4% per month at 25℃ (-4℉) |
| Battery Unit Weight: | 18.8KGS |
| Designed Life: | 10 Years |
| Warranty: | 3 Years |
Product Advantage
1. Maintenance free- with the gas recombination technology, there is no need to replenish water or sulfuric acid until tht whole life of the battery.
2. Safety- with the valves covering on the acid filling wholes, when the internal pressure is getting higher, the valves will open and release the pressure power and there will be no danger with harm gas or electrolyte.
3. Low self-discharge rate: high quality Pb Ca alloy plates are used, the ovr potential of hydrogen precipitation is increased, and the self-discharge rate of the battery is reduced
4. Long Lifespan- at the temperature of 20 degrees, the design lifespan is 10 years and the floating life of the battery could be 3-5 years.
Product Uses
The core usage is: UPS/EPS power supplies- whenever there is power off, the backup power will start within 10ms so that the connected; Telecom power station; House Solar and wind power systems; Project Solar systems; Banking power suppliers and health care equipment; Scientific research; Systematic users.
Product Operate Guide
Installation location: Try to install the battery at the bottom of the device for easy inspection, maintenance and replacement.
Do not move the battery when charging: Do not move the battery when charging, pay attention to the weight of the battery, and avoid causing injury to the operator.
Anti-static: Do not cover the battery with materials that can generate static electricity, which may cause a fire or explosion.
Insulation protection: Use insulating covers on battery terminals and connecting pieces to prevent electric injuries to people.
Professional installation and maintenance: The installation and maintenance of the battery should be carried out by a qualified person, and non-professional operation may cause danger.
Product Video
12V 65AH Lead acid battery, the electrode is mainly made of lead and its oxide, and the electrolyte is sulfuric acid solution. When been discharged, the main component of the positive electrode is lead dioxide, and the main component of the negative electrode is lead; When been charged, the main components of the positive and negative electrodes are lead sulfate, it is used for UPS, EPS, portable power station and some large medical equipments.
Technical Parameters
| Standard Voltage: | 12V |
| Battery Capacity | 65AH |
| Floating Charging Voltage: | 2.275-2.3V/cell |
| Discharging Rate: | 0.1-0.25C |
| Max Discharging Currnt Rate: | 0.25C |
| Terminal: | M8 Coppers |
| Working Temperature: | -20℃ to 50℃(-4℉ to 122℉) |
| Dimensions: | 350*166*173 mm |
| Carton Size: | 365*179*210 mm |
| Pieces/ Carton | 1 PCS |
| Storage Self-loss: | 3%-4% per month at 25℃ (-4℉) |
| Battery Unit Weight: | 18.8KGS |
| Designed Life: | 10 Years |
| Warranty: | 3 Years |
Product Advantage
1. Maintenance free- with the gas recombination technology, there is no need to replenish water or sulfuric acid until tht whole life of the battery.
2. Safety- with the valves covering on the acid filling wholes, when the internal pressure is getting higher, the valves will open and release the pressure power and there will be no danger with harm gas or electrolyte.
3. Low self-discharge rate: high quality Pb Ca alloy plates are used, the ovr potential of hydrogen precipitation is increased, and the self-discharge rate of the battery is reduced
4. Long Lifespan- at the temperature of 20 degrees, the design lifespan is 10 years and the floating life of the battery could be 3-5 years.
Product Uses
The core usage is: UPS/EPS power supplies- whenever there is power off, the backup power will start within 10ms so that the connected; Telecom power station; House Solar and wind power systems; Project Solar systems; Banking power suppliers and health care equipment; Scientific research; Systematic users.
Product Operate Guide
Installation location: Try to install the battery at the bottom of the device for easy inspection, maintenance and replacement.
Do not move the battery when charging: Do not move the battery when charging, pay attention to the weight of the battery, and avoid causing injury to the operator.
Anti-static: Do not cover the battery with materials that can generate static electricity, which may cause a fire or explosion.
Insulation protection: Use insulating covers on battery terminals and connecting pieces to prevent electric injuries to people.
Professional installation and maintenance: The installation and maintenance of the battery should be carried out by a qualified person, and non-professional operation may cause danger.
Product Video
