 |
| Quantity: | |
|---|---|
6-GFM-150
OEM
12V 150AH Lead acid battery, the electrode is mainly made of lead and its oxide, and the electrolyte is sulfuric acid solution. When been discharged, the main component of the positive electrode is lead dioxide, and the main component of the negative electrode is lead; When been charged, the main components of the positive and negative electrodes are lead sulfate, it is used for UPS, EPS, portable power station and some large medical equipments.
Technical Parameters
| Standard Voltage: | 12V |
| Battery Capacity | 150AH |
| Floating Charging Voltage: | 2.275-2.3V/cell |
| Max Discharging Rate: | 0.1-0.25C |
| Max Charging Currnt: | 0.1C |
| Terminal: | M8 Coppers |
| Working Temperature: | -20℃ to 50℃(-4℉ to 122℉) |
| Dimensions: | 483*170*239 mm |
| Carton Size: | 496*183*273 mm |
| Pieces/ Carton | 1 PCS |
| Storage Self-loss: | 3%-4% per month at 25℃ (-4℉) |
| Battery Unit Weight: | 38KGS |
| Designed Life: | 10 Years |
| Warranty: | 3Years |
Product Advantage
1. Sealed and Maintenance-Free: The sealed construction is safe for indoor use and requires minimal maintenance, offering a hassle-free experience.
2. Safety- with the valves covering on the acid filling wholes, when the internal pressure is getting higher, the valves will open and release the pressure power and there will be no danger with harm gas or electrolyte.
3. Low self-discharge rate: high quality Pb Ca alloy plates are used, the ovr potential of hydrogen precipitation is increased, and the self-discharge rate of the battery is reduced
4. Long Lifespan- at the temperature of 20 degrees, the design lifespan is 10 years and the floating life of the battery could be 3-5 years.
5.Low temperature resistance and high temperature resistance: Because the electrolyte is a lens structure, the lead crystal battery is less affected by the environment, and can work normally in a low temperature environment of minus 40 degrees, and is not affected by high temperature.
6.Non-dangerous goods certification: Lead-crystal battery has obtained a number of environmental protection quality certifications, and is the only product in the field of lead-acid battery that has obtained national non-dangerous goods certification, which can be transported as a conventional product.
Product Uses
Off-Grid Solar Systems: Ideal for off-grid homes and cabins, providing a reliable energy source independent of the main power grid.
Renewable Energy Storage: Efficiently stores energy generated by solar panels, ensuring a continuous supply of power even during periods of low sunlight.
Home Energy Storage: Perfect for home energy storage systems, supplementing grid power with stored solar energy for a more sustainable lifestyle.
Commercial Solar Farms: Supports commercial solar energy projects, ensuring a reliable and efficient energy storage solution.
Product Operate Guides
On the first charge, the battery should be charged until the remaining fifteen to thirty percent is used before charging, which helps the battery to circulate fully and avoid disrupting the charging cycle.
Do not charge for more than 8-10 hours for the first time to avoid the battery entering an over-float state, thereby reducing the battery life.
The first three charges of a brand new lead-acid battery are very important, and it is recommended to charge the battery in a timely manner when the battery has 10-25% remaining charge, and give enough charging time to keep it in the range of 6-10 hours.
When charging, connect the battery port first and then connect the power supply, and when charging is over, pull the power port first and then disconnect the battery.
Lead-acid battery charging should be carried out in a cool and ventilated location, avoiding high temperatures, closed or humid environments, which can cause damage to the battery.
Avoid charging at temperatures that are too high or too low, which will affect the performance and life of the battery.
For lead-acid batteries that are not used for a long time, it is recommended to charge them every 1-2 months, and cut off all lines connected to the battery in time to avoid the battery from depleting too quickly.
The battery is deeply discharged once every 1-2 months to activate the active material of the battery and prevent it from precipitating
12V 150AH Lead acid battery, the electrode is mainly made of lead and its oxide, and the electrolyte is sulfuric acid solution. When been discharged, the main component of the positive electrode is lead dioxide, and the main component of the negative electrode is lead; When been charged, the main components of the positive and negative electrodes are lead sulfate, it is used for UPS, EPS, portable power station and some large medical equipments.
Technical Parameters
| Standard Voltage: | 12V |
| Battery Capacity | 150AH |
| Floating Charging Voltage: | 2.275-2.3V/cell |
| Max Discharging Rate: | 0.1-0.25C |
| Max Charging Currnt: | 0.1C |
| Terminal: | M8 Coppers |
| Working Temperature: | -20℃ to 50℃(-4℉ to 122℉) |
| Dimensions: | 483*170*239 mm |
| Carton Size: | 496*183*273 mm |
| Pieces/ Carton | 1 PCS |
| Storage Self-loss: | 3%-4% per month at 25℃ (-4℉) |
| Battery Unit Weight: | 38KGS |
| Designed Life: | 10 Years |
| Warranty: | 3Years |
Product Advantage
1. Sealed and Maintenance-Free: The sealed construction is safe for indoor use and requires minimal maintenance, offering a hassle-free experience.
2. Safety- with the valves covering on the acid filling wholes, when the internal pressure is getting higher, the valves will open and release the pressure power and there will be no danger with harm gas or electrolyte.
3. Low self-discharge rate: high quality Pb Ca alloy plates are used, the ovr potential of hydrogen precipitation is increased, and the self-discharge rate of the battery is reduced
4. Long Lifespan- at the temperature of 20 degrees, the design lifespan is 10 years and the floating life of the battery could be 3-5 years.
5.Low temperature resistance and high temperature resistance: Because the electrolyte is a lens structure, the lead crystal battery is less affected by the environment, and can work normally in a low temperature environment of minus 40 degrees, and is not affected by high temperature.
6.Non-dangerous goods certification: Lead-crystal battery has obtained a number of environmental protection quality certifications, and is the only product in the field of lead-acid battery that has obtained national non-dangerous goods certification, which can be transported as a conventional product.
Product Uses
Off-Grid Solar Systems: Ideal for off-grid homes and cabins, providing a reliable energy source independent of the main power grid.
Renewable Energy Storage: Efficiently stores energy generated by solar panels, ensuring a continuous supply of power even during periods of low sunlight.
Home Energy Storage: Perfect for home energy storage systems, supplementing grid power with stored solar energy for a more sustainable lifestyle.
Commercial Solar Farms: Supports commercial solar energy projects, ensuring a reliable and efficient energy storage solution.
Product Operate Guides
On the first charge, the battery should be charged until the remaining fifteen to thirty percent is used before charging, which helps the battery to circulate fully and avoid disrupting the charging cycle.
Do not charge for more than 8-10 hours for the first time to avoid the battery entering an over-float state, thereby reducing the battery life.
The first three charges of a brand new lead-acid battery are very important, and it is recommended to charge the battery in a timely manner when the battery has 10-25% remaining charge, and give enough charging time to keep it in the range of 6-10 hours.
When charging, connect the battery port first and then connect the power supply, and when charging is over, pull the power port first and then disconnect the battery.
Lead-acid battery charging should be carried out in a cool and ventilated location, avoiding high temperatures, closed or humid environments, which can cause damage to the battery.
Avoid charging at temperatures that are too high or too low, which will affect the performance and life of the battery.
For lead-acid batteries that are not used for a long time, it is recommended to charge them every 1-2 months, and cut off all lines connected to the battery in time to avoid the battery from depleting too quickly.
The battery is deeply discharged once every 1-2 months to activate the active material of the battery and prevent it from precipitating
