 |
| Quantity: | |
|---|---|
6-GFM-24
OEM
12V 24AH Lead acid battery, in which the electrode is mainly made of lead and its oxide, and the electrolyte is sulfuric acid solution. In the discharged state of lead-acid battery, the main component of the positive electrode is lead dioxide, and the main component of the negative electrode is lead; In the charging state, the main components of the positive and negative electrodes are lead sulfate, it is used for UPS, EPS, portable power station and some large medical equipments.
Technical Parameters
| Standard Voltage: | 12V |
| Battery Capacity | 24AH |
| Floating Charging Voltage: | 2.275-2.3V/cell |
| Discharging Rate: | 0.1-0.2C |
| Max Discharging Currnt Rate: | 0.2C |
| Terminal: | M6 Coppers |
| Working Temperature: | -20℃ to 50℃(-4℉ to 122℉) |
| Dimensions: | 165*125*175 mm |
| Carton Size: | 263*176*198 mm |
| Pieces/ Carton | 2 PCS |
| Storage Self-loss: | 3%-4% per month at 25℃ (-4℉) |
| Battery Unit Weight: | 7.6KGS |
| Designed Life: | 6 Years |
| Warranty: | 1 Year |
Product Advantage
1.Deep cycle capability: Solar batteries need to have good deep cycle capability and be able to withstand repeated charging and discharging processes, especially the ability to overcharge and overdischarge.
2.Long life: Through special process design and colloidal electrolyte, solar batteries can achieve a long service life.
3.Environmental adaptability: Solar batteries need to be able to adapt to different environmental requirements, such as high altitude, high temperature, low temperature and other conditions to work normally.
4.Working principle: The DC voltage generated by the solar cell module converts the light energy into electrical energy, and the electric energy is transmitted to the battery for storage after the overcharge protection of the intelligent controller.
Product Uses
The core usage is: UPS/EPS power supplies- whenever there is power off, the backup power will start within 10ms so that the connected; Telecom power station; House Solar and wind power systems; Project Solar systems; Banking power suppliers and health care equipment; Scientific research; Systematic users.
Product Operate Guide
Only batteries or battery packs with the same actual capacity can be used in series. The connection part shall be tight to prevent sparks; in case of poor contact, the contact surtace can be cleaned with soda water. Only batteries or battery groups with the same actual voltage can be used in parallel, The positive and negative poles shall not be reversed or short circuited. The batteries of the battery pack shall be separated by more than 10 mm to facllitate heat dissipation. Floating charge (limit voltage, control current) use: charging voltage 2.20-2.30V single cell (25ºC). When trickle current is used, the floating charge current of the battery is adjusted to less than 2mAl ah; Temperature compensation, the temperature compensation coefficient of each monomer is 3MV c. (based on20ºC) Cyclic use (stop when fully charged, charge when fully discharged):charging voltage 2.35-2.45v single call maximum power. The flow shall not be greater than 25% of the nominal capacity.
Product Video
12V 24AH Lead acid battery, in which the electrode is mainly made of lead and its oxide, and the electrolyte is sulfuric acid solution. In the discharged state of lead-acid battery, the main component of the positive electrode is lead dioxide, and the main component of the negative electrode is lead; In the charging state, the main components of the positive and negative electrodes are lead sulfate, it is used for UPS, EPS, portable power station and some large medical equipments.
Technical Parameters
| Standard Voltage: | 12V |
| Battery Capacity | 24AH |
| Floating Charging Voltage: | 2.275-2.3V/cell |
| Discharging Rate: | 0.1-0.2C |
| Max Discharging Currnt Rate: | 0.2C |
| Terminal: | M6 Coppers |
| Working Temperature: | -20℃ to 50℃(-4℉ to 122℉) |
| Dimensions: | 165*125*175 mm |
| Carton Size: | 263*176*198 mm |
| Pieces/ Carton | 2 PCS |
| Storage Self-loss: | 3%-4% per month at 25℃ (-4℉) |
| Battery Unit Weight: | 7.6KGS |
| Designed Life: | 6 Years |
| Warranty: | 1 Year |
Product Advantage
1.Deep cycle capability: Solar batteries need to have good deep cycle capability and be able to withstand repeated charging and discharging processes, especially the ability to overcharge and overdischarge.
2.Long life: Through special process design and colloidal electrolyte, solar batteries can achieve a long service life.
3.Environmental adaptability: Solar batteries need to be able to adapt to different environmental requirements, such as high altitude, high temperature, low temperature and other conditions to work normally.
4.Working principle: The DC voltage generated by the solar cell module converts the light energy into electrical energy, and the electric energy is transmitted to the battery for storage after the overcharge protection of the intelligent controller.
Product Uses
The core usage is: UPS/EPS power supplies- whenever there is power off, the backup power will start within 10ms so that the connected; Telecom power station; House Solar and wind power systems; Project Solar systems; Banking power suppliers and health care equipment; Scientific research; Systematic users.
Product Operate Guide
Only batteries or battery packs with the same actual capacity can be used in series. The connection part shall be tight to prevent sparks; in case of poor contact, the contact surtace can be cleaned with soda water. Only batteries or battery groups with the same actual voltage can be used in parallel, The positive and negative poles shall not be reversed or short circuited. The batteries of the battery pack shall be separated by more than 10 mm to facllitate heat dissipation. Floating charge (limit voltage, control current) use: charging voltage 2.20-2.30V single cell (25ºC). When trickle current is used, the floating charge current of the battery is adjusted to less than 2mAl ah; Temperature compensation, the temperature compensation coefficient of each monomer is 3MV c. (based on20ºC) Cyclic use (stop when fully charged, charge when fully discharged):charging voltage 2.35-2.45v single call maximum power. The flow shall not be greater than 25% of the nominal capacity.
Product Video
